WOTJC302: Wood Joints Construction

Topic outline

• 

  Course Overview

  Introduction

  This module describes the knowledge and skills required to construct joints. It describes the skills, knowledge, and attitudes required for the trainee to construct lengthening joints, construct widening and construct framing joint

  
  

  (Source Internet)

  Learning Objectives 
  

  At the end of the module the learner will be able to: 

  1. Prepare tools, materials, and equipment for joint 
  2. Join and adjust pieces for fitting 
  3. Fix joint for permanent assembly

  
  

  • Announcements Forum
• 

  Learning Outcome 1:Prepare tools, materials and equipment for the joint.

  • Indicative Content 1.1: Identify types of lengthening joints Interactive Content
  • Indicative Content 1.2: Identify types of widening joints Interactive Content
  • Indicative Content 1.3: Identify types of framing joints Interactive Content
  • Indicative Content 1.4: Sketching types of joints Interactive Content
  • Indicative Content 1.5: Preparation of materials Interactive Content
  • Assessments for LO 1. Interactive Content
• 

  Learning Outcome 2: Join and adjust pieces for fitting

  • Indicative Content 2.1: Cutting pieces of joint. Interactive Content
  • Indicative Content 2.2: Fitting joint Interactive Content
  • Indicative Content 2.3: Angles accuracy verification Interactive Content
  • Indicative Content 2.4: Other measurements accuracy verification Interactive Content
  • Assessment for LO 2 Interactive Content
• 

  Sources

  • Image sources Page