This module describes the knowledge, skills, and attitudes required to Repair Diesel Injection System under minimum supervision.

At the end of this module, learners will be able:

. To Dismantle diesel injection pump from the engine

. To Repair diesel injection pump

. Remount diesel injection pump to the engine.

. Repair diesel injectors. 

Module Code: AUTDI501
Trade: Automobile Technology
Level: 5

This module describes the knowledge, skills, and attitude required to repair Hybrid Vehicle
under minimum supervision. At the end of this module, learners will be able to identify hybrid vehicle system components, maintain hybrid vehicle battery pack management, and repair hybrid vehicle starting system. 

Module Code: AUTHV501
Trade: AUTOMOBILE TECHNOLOGY
Level: 5

A compressed air brake system, is a type of friction brake for vehicles in which compressed air pressing on a piston is used to apply the pressure to the brake pad needed to stop the vehicle. Air brakes are used in large heavy vehicles, particularly those having multiple trailers which must be linked into the brake system, such as trucks, buses, trailers, and semi-trailers, in addition to their use in railroad trains. Spring type parking brakes may be installed on an air brake equipped vehicle to ensure a reliable parking brake system. In the service brake system, the brakes are held retracted by springs, and applied by air pressure. Spring type parking brakes are applied and remain applied without air pressure. The parking brake chambers are attached to the service brake chambers and operate the brakes through the same linkage. The system can also act as an emergency brake. Loss of air from the main system may automatically apply the brakes, depending on how the system is piped.

Trade: Automobile technology
Level: 5