MATDO 301: Perform Drilling Machine Operations

Topic outline

• 

  General

  • Overview

    Introduction

    This module describes employable and practicable skills, knowledge, and right attitudes required by a learner to prepare materials, tools, and equipment for drilling operations, carry out drilling operations, and perform post-operation activities, the content provided in this course is package reserved for a learner pursuing TVET certificate III in manufacturing technology. Graduates at this level will have knowledge and skills for initial work, community involvement, and/or further learning

     

                                                          Image Source

    Learning Objectives

    At the end of the module the learner will be able to:

    1. Prepare for drilling operations

    2. Carry out drilling operations

    3. Perform post-operation activities

    
    

  • Announcements Forum
• 

  Learning Outcome 1: Identify the Work

  • Indicative Content 1.1: Identify the Materials Interactive Content
  • Indicative Content 1.2: Identify Work Size Interactive Content
  • Indicative Content 1.3: Identify the Drilling Machine Interactive Content
  • Assessment Interactive Content
• 

  Learning Outcome 2: Select Tools, Equipment, and Machine

  • Indicative Content 2.1: Measure and Mark Out Interactive Content
  • Indicative Content 2.2: Select the Drilling Machine Interactive Content
  • Indicative Content 2. 3: Select Drills and Equipment Interactive Content
  • Assessment Interactive Content
• 

  Learning Outcome 3: Set Up of Drilling Machine

  • Indicative Content 3.1: Hold Drill Bit and Workpiece Interactive Content
  • Indicative Content 3.2: Adjust Speed and Feed Interactive Content
  • Indicative Content 3.3: Connect the Machine Interactive Content
  • Video - Drilling Machine Setup | Manufacturing Processes Interactive Content
  • Assessment Interactive Content
• 

  Learning Outcome 4: Perform Drilling Operations

  • Indicative Contente 4.1: Measure and Mark Out Interactive Content
  • Indicative Content 4.2: Lubricate the Workpiece Interactive Content
  • Indicative Content 4.3: Finish Work Interactive Content
  • Animation - Drilling Operations Interactive Content
  • Assessment Interactive Content
• 

  Learning Outcome 5: Clean and Store Tools and Equipment

  • Indicative Content 5.1: Clean Tools and Equipment Interactive Content
  • Indicative Content 5.2: Arrange Tools and Equipment Interactive Content
  • Indicative Content 5.3: Store Tools and Equipment Interactive Content
  • Assessment Interactive Content
• 

  Source

  • References Page