Content/ topic1 Mount the exhaust manifold system
Content/ topic1 Mount the exhaust manifold system
Step 1: Attach the new exhaust manifold gasket onto the studs on the cylinder head.
Step 2: Install a new gasket between the bottom of the exhaust manifold and the exhaust pipes.
Step 3: Attach the exhaust manifold to the exhaust pipes below the vehicle.
Step 4: Slide the exhaust manifold onto the cylinder head studs.
Step 5: Hand-tighten each nut onto the cylinder head studs. Tighten nuts in the precise order as instructed by the vehicle manufacturer until each nut is hand-tight and the exhaust manifold is flush against the cylinder head equally.
Step 6: Tighten exhaust manifold nuts. Tighten to the require torque pressure and in the exact pattern as recommended by the vehicle manufacturer.
Step 7: Reinstall heat shield onto exhaust manifold.
Step 8: Reattach parts. Reattach engine covers, coolant lines, air filters and other parts that were removed to gain access to the exhaust manifold.
Step 9:
Refill radiator with recommended coolant. Refill the coolant (if you had to
remove coolant lines).
Step 10: Remove any tools, parts, or materials used for the job.
Step 11:
Reattach battery terminals